Straight-lay hardwood installs for $3.25 per sq ft in labor at Wills Flooring; herringbone and chevron start from that rate and add a pattern premium that we quote at the free estimate, plus 15 to 20 percent more material for waste and a pattern-specific product that costs more per box. The pattern roughly doubles the number of cuts and the layout time, and chevron is more demanding than herringbone. For a 600 sq ft Lynnwood entry and living room, expect the material order and the labor line to both be noticeably higher than a plank floor of the same size.
Herringbone has gone from a Pinterest board to a real request in Lynnwood, partly because of the new townhomes around the light rail station and partly because owners of 1960s and 70s Alderwood and Martha Lake ramblers are opening up kitchens and want the main floor to look like more than builder plank. The catch: no published price list, including ours, has a single herringbone number, because the pattern cost depends on the room shape, the borders and the product. Here is what drives the premium, the straight-lay math you can count on, and where herringbone is worth it.
Herringbone vs chevron: what you are actually buying
Herringbone
Rectangular blocks, staggered zigzag
- Each piece is a normal rectangle with square ends
- Pieces meet at 90 degrees, end to side, in a stepped pattern
- Uses standard-width engineered or solid planks cut to length, or purpose-made herringbone blocks
- Waste around 10 to 15 percent
Chevron
Angled ends meeting in a clean point
- Each piece is cut at 45 or 60 degrees at both ends and comes in left and right versions
- Pieces meet point to point in continuous V lines
- Must be purchased as a chevron product; you cannot make it from plank on site without heavy waste
- Waste around 15 to 20 percent
What drives the pattern premium
Layout time
A plank floor starts from one straight wall. A pattern starts from a center line snapped through the room, squared to the main sight line, with the first rows built on a temporary straightedge. Half a day of layout before a single piece is glued or nailed is normal.
Cuts at every wall
On a plank floor, only the ends of each row are cut. In herringbone every piece that touches a wall is cut at an angle, on all four walls. That is the main reason labor runs well above the $3.25 straight-lay rate.
Flatter subfloor required
Pattern floors telegraph subfloor dips at every joint because the pieces are short. We often add a leveling step in 1960s ramblers that would be optional under long planks. Subfloor prep is quoted at the estimate.
Borders and transitions
A herringbone field usually wants a straight border board around it so the angled cuts do not meet the baseboard raw. Borders add layout and cutting time and look best when planned into the room size.
Straight plank, herringbone and chevron side by side
| Cost factor | Straight plank | Herringbone | Chevron |
|---|---|---|---|
| Installation labor (Wills) | $3.25 / sq ft published | $3.25 base plus pattern premium, quoted | $3.25 base plus a larger premium, quoted |
| Material waste to order | 5 to 10% | 10 to 15% | 15 to 20% |
| Product type | Any engineered or solid plank | Plank cut to length, or herringbone blocks | Dedicated chevron product, left and right pieces |
| Subfloor flatness | Standard | Tighter; leveling often added | Tightest |
| Time for 600 sq ft | 2 days | 3 to 4 days | 4 to 5 days |
| Site-finished option | $2.75 / sq ft install plus refinishing rates | Same rates; unfinished herringbone blocks are common | Rare; most chevron is prefinished engineered |
The only Wills Flooring prices in this table are the published straight-lay and unfinished rates. Pattern premiums depend on the room and are given in writing at the free estimate.
Price the straight-lay baseline for your Lynnwood floor
Hardwood Installation Calculator
Installation pricing from our published rate card. Material is quoted separately based on the floor you choose.
A Lynnwood example, with the math you can check
- Alderwood rambler · entry, hall and living room · 600 sq ftPrefinished engineered white oak, herringbone in the living room and entry, straight plank in the hall as a border run.Straight-lay labor baseline: 600 × $3.25 = $1,950. Pattern premium added at the estimate.
- Material orderOrder 15 percent over for herringbone waste and cuts against four walls.600 × 1.15 = 690 sq ft of product to buy, versus about 640 sq ft for plank
- Site-finished alternativeUnfinished herringbone blocks installed at the unfinished rate, then sanded and finished natural. Gives the seamless, custom look and lets you pick the stain later.600 × $2.75 + 600 × $3.99 = $4,044 in labor and finish, plus pattern premium and material
- If the stairs are includedStairs are always straight treads, never pattern.13 stairs × $125 = $1,625
Where herringbone is worth it, and where it is not
- Worth it: one room you see from the front door. An entry, a dining room or an open living room. The pattern reads immediately and the premium covers a few hundred square feet, not the whole house.
- Worth it: a townhome main floor. Lynnwood's new light-rail townhomes have small, square main floors where a pattern makes the room feel finished and larger. Buyers notice it in photos.
- Not worth it: bedrooms and hallways. Furniture covers it, and a narrow hall shows only half a pattern. Run plank there in the same product and let the herringbone room be the feature.
- Not worth it: a small room with a big pattern. A 10 by 11 ft office in a Martha Lake split-level cannot fit enough repeats to read as herringbone. It reads as a mistake. Scale the block size to the room.
- Rethink it: an uneven 1960s subfloor you do not want to level. Short pieces over a wavy floor open at the joints. Either budget for leveling or choose long planks, which bridge dips.
Vinyl plank herringbone is a different product and price: If you love the look but not the number, herringbone-format vinyl plank exists and installs at the $2.50 per sq ft vinyl rate plus its own pattern premium. It is not hardwood and will not refinish, but for a basement or rental it can make sense. We cover it in our herringbone vinyl plank post.
Questions to ask before you sign a pattern quote
- Is the pattern premium written as a separate line, so I can compare it to straight plank?
- How much material am I ordering over the measured area, and who keeps the leftover?
- Where does the pattern center, and did you snap the line to the main sight line from the entry?
- Is a border planned, and is it included?
- What does the subfloor need, and is leveling in the price?
Herringbone and chevron questions from Lynnwood
Asked at the showroom on 196th St SW, usually with a photo.
How much more does herringbone cost than regular hardwood flooring?
Is chevron more expensive than herringbone?
Can herringbone be made from regular hardwood planks?
Does herringbone need a special subfloor?
Can herringbone floors be site-finished instead of prefinished?
How long does a herringbone installation take?
Get the pattern premium in writing
We bring herringbone and chevron samples to your Lynnwood home, check the subfloor, lay out the center line with you, and leave a firm written quote. Free, no obligation.
Wills Flooring serves Lynnwood, Everett, Seattle, Sammamish, Edmonds, Kirkland, Snohomish and the rest of Snohomish and King County from our Lynnwood showroom. See our hardwood installation in Lynnwood, WA, hardwood installation service, published price list, nail-down vs glue-down vs floating hardwood, prefinished vs site-finished hardwood and wide plank vs narrow plank.











